EV3

The Vöxx Replica EV3 features 12 broad, swept spokes that curve outward from the covered center section toward the rim. The sculpted spokes form a turbine-inspired pattern with 12 elongated openings, giving the wheel a smooth aerodynamic appearance without completely closing off the face.

A large center-cap assembly conceals the five-lug mounting hardware and creates a cleaner transition between the hub area and the spokes. The spokes reach close to the rim, producing a full-face profile with only a narrow outer edge. This combination of covered hardware, curved surfaces and carefully shaped openings gives the EV3 a streamlined look developed with electric-vehicle efficiency in mind.

The EV3 uses flow-formed construction, which shapes and compresses the barrel after casting to reduce unnecessary weight while maintaining the strength required for heavier electric vehicles. We offer the EV3 in 18x8.5, 19x9, 20x9 and 20x10, providing several diameter and width options for compatible EVs, hybrids and gas-powered vehicles.

Every EV3 size uses a +35mm offset and is dual drilled for 5x114.3 and 5x120 bolt patterns. The 18x8.5 and 19x9 versions use a 73.1mm center bore, while the 20x9 and 20x10 versions use a 74.1mm center bore.

The 18x8.5 wheel weighs approximately 25 pounds, while the 19x9 weighs approximately 28 pounds. The 20x9 weighs approximately 31 pounds, and the wider 20x10 weighs approximately 33 pounds. Each size is available exclusively in Matte Black.

The EV3 is designed for select electric-vehicle applications, including compatible Tesla Model 3 configurations. Its dual bolt patterns and range of sizes also allow it to fit other compatible EVs, hybrids, sedans, coupes and crossovers when the required offset, center bore, brake clearance and tire sizing match.